How it works
Start to finish, in real time
Rather watch first?
From bare nail to a full set. Turn the sound on for the walkthrough.
Before
After
The same hand, ten minutes later.
Shop the colours
One pass with the file over your own nail, so the gel has grip. You never file the wrap itself — it is already shaped.
Wipe the nail with alcohol or acetone on a clean pad. Any oil left behind and the edge will lift later.
Lay the sixteen sizes next to your hand and pick the best one per nail. Peel the wrap loose at the side, set it on your nail bed and press from the centre outwards.
Put the UV Shaping Lamp over it and press the wrap against your nail curve with the curved head while the light does its work.
Three things that make the difference
Bend it first. Peel it loose at the side and bend the wrap gently along your nail shape before you set it down.
Centre first. Work from the middle out to the sides and you will not trap an air bubble.
Edges last. Run the angled wooden stick along the edge until everything sits flush.
A thin line along the inner edge, where the wrap meets your nail. That is the spot where water would otherwise get in.
One nail at a time under the lamp. After that it is dry, high gloss and ready to use. No waiting.
Removal without drama
Work a wooden stick with a little remover or oil along the edges until the wrap lets go, then wipe clean with a fresh pad. No filing, no pulling — and so no thin nails afterwards.
Wooden stick and file are included
xoxo Neilé
Still have a question? Email me at info@neilebeauty.com